Commercial artificial Giant Everest Tree

The Giant Everest Fir is our best selling commercial artificial Christmas tree. Named for the tallest mountain in the world, the Everest Family towers over the competition in terms of reliability, quality and durability. These trees are used for Cities, Malls, Hotels, Parks, Zoos, etc.

Christmas Lights Etc. offers a variety of lighting options for the Giant Everest tree. We offer the standard Mini-lites in addition to the conventional C7 bulbs. This year we will begin offering LED lights in C7 and G20 bulb designs. Consult with your electrician for power requirements and connection. They start at 14 feet in size and range up to 50 feet. You can start with a small 14' tree and add to it as often as you would like till it reaches 50'.

Below are the instructions for assembly of the 14' Giant Everest tree. If you desire to grow your tree just add the additional rings.

                      Instructions for 14' Giant Everest

1. Unwrap metal framework from its protective covering, keeping in place the hangtag label. If cutting the protective covering with a knife, use caution to not cut electrical wiring or excessively scratch frame. Hardware for connecting framework will be attached to each piece of framework under the protective covering.

2. Completely assemble the metal framework of the tree. Bolt ring sections (levels) together using hardware provided  (metal plate and two bolts). One piece of the plate is welded to the frame, and its matching piece should be attached with the bolts.

3. Level A (smallest) and B are each one piece.

4. After each level is assembled (horizontally), begin stacking levels (vertically) on top of each other using the largest level you have for your tree at the base, and level A at the top.

5. Attach the assembly plates to the stacking frames as you progress upward. Be sure to keep the electrical wiring free of the plate so it is not pinched.

6. Make all electrical connections within levels. Connect vertical harness plugs from each level to your power supply. Consult a qualified electrician to assure adequate electrical service is available to avoid overloaded circuits.

7. Insert treetop (3 pcs) into top section (A) and plug into outlet available in section A. Lighted branches are all the same size. You can use any lighted branch in any section of the frame from top to bottom. Shape the branches and insert individually starting at the top level and working your way down. Plug each branch into the level that it is attached. Stack light set plugs if necessary.

8. You will have numerous unlit branches that are smaller than the lighted branches. These unlit branches are to be placed around the base to hide the frame. If the tree is to be used outdoors, you may consider placing cable ties (not included) around the branch/frame connection to further secure branches in place.

9. If the tree is to be used outdoors, select a site that is flat and level. Anchor the tree to prevent unwanted movement during inclement weather. Three O-type connections are permanently welded to the framework in the top section of the tree. Running a guide wire through each of the O-type connections and securing the wire at the base of the tree will insure the tree does not move when fully assembled and decorated. Securing the tree with the wire should be accomplished prior to attachment of the branches to allow maximum accessibility to the inner portion of the tree. The triangulation effect of securing the tree with the guide wires at the base of the tree will insure your tree will not move. Be sure the anchoring method you use is securely fastened in the ground prior to attaching the guide wire from the tree. You may consider placing cable ties (not included) around the branch/frame connection to further secure the branches in place.

11. Our Giant Everest trees are expandable to 50 feet in increments of 3 feet; simply call us for current pricing.