| |
|
Rope Light - Light up the town
with contemporary flair! You'll find unlimited uses for our brightly colored
Rope Light, during the holidays and beyond. Illuminate a deck or patio, outline
doors and windows, use as a garland…and much more. You can use connectors to
combine five vibrant colors. What's more, you can cut these ropes every 36
inches to create different color and shape configurations.
|
| Rope Light - Frequently Asked Questions
|
|
How do I mount rope light? Ropelight can be mounted using a mounting track or
mounting clips. The track can be mounted using good adhesive or screws. If
using clips, simply use small screws to attach them. Then then simply push the
rope lighting into the track or clips. You should not use adhesives directly on
the ropelight itself.
|
|
What type of connectors do I need? Most applications require a power cord, a
power connector and an end cap to protect the bare end at the end of the
ropelight run. Other connectors that may be useful are T and Y connectors used
to change the direction.
|
|
How easy is it to work with? Ropelight is very easy to work with. Few tools are
required and the flexibility of ropelight allows it to be installed for a
variety of applications by a novice. It connects to a plug via a power pin that
is simply screwed onto the end of the rope light.
|
|
How will I know where I can cut the rope light? On every piece of rope light,
there are tiny marks or scissors logos indicating where you are allowed to cut.
For 110 Volt 1/2", these marks are every 18", and on the 12 Volt 3/8", they are
every 6". NOTE: Cutting at other than on these marks will prevent that section
of the ropelight from operating.
|
| Can I change colors in a run? Absolutely - using a splice or connector, you can
join the two or more different colors together.
|
|
What tool is best to cut the ropelight? Kitchen shears work just fine.
|
 Back to Rope Light Products
|
